The Blue Line Gen2 Quad PIR Detector uses two individual sensors that operate like two PIRs in one detector. Each sensor processes signals separately. Both must activate to generate an alarm signal. This improves false alarm immunity relative to a standard PIR, because false alarm sources such as noise spikes and small animals are ignored.
Quad detectors also provide superior catch performance versus a standard PIR or dual-technology
detector. They are particularly well suited for challenging installation situations; for example, cases
where cross catch of intruders cannot be guaranteed or where intruders are able to cross the detection
pattern very quickly.
Parts included:
1 x Detector
1 x Hardware pack
• 2 anchors (#6, #8 x 7/8)
• 2 screws( #6 x 1.25)
• 1 cable tie (2.5 mm)
1 x Installation Guide
Mounting
The recommended mounting height is 2.2 m to 2.75 m (7.5 ft to 9 ft) with no adjustments required. Mount the motion detector level, both horizontally and vertically.
Mounting options:
• On a flat wall (surface, semi-flush), with the optional
B335-3 Swiveling low-profile mount, or with the
optional B328 Gimbal-mount Bracket
• In a corner (the junction of two perpendicular walls)
• On the ceiling with the optional B338 Universal
Ceiling-mount Bracket
Reviews
There are no reviews yet.