TP-link VIGI SP6030 Intelligent Solar Power Supply System 60W / 31.2Ah/10.8V Lithium Battery

Key Features

• 60 W photovoltaic panel with compact footprint: The SP6030 uses a 60 W solar panel with dimensions of approximately 690 × 516 × 30 mm, providing a good balance between power output and physical size. This makes it easier to mount on poles, posts or smaller structures while still generating enough energy for a typical single-camera installation. The panel is engineered to operate efficiently with the matched battery and controller, ensuring consistent performance in a wide range of lighting conditions.
• 31.2 Ah 10.8 V lithium battery for reliable storage: A high-capacity 31.2 Ah lithium battery at 10.8 V provides substantial energy storage, supporting extended runtime during nights and low-sunlight periods. With a life rating of more than 500 cycles and intelligent auxiliary heating, the battery is designed to deliver dependable performance over time. This helps maintain surveillance continuity during seasonal changes, colder weather and periods of higher-than-normal camera activity.
• Optimised runtime and charging performance: Under modelled conditions, the SP6030 offers indicative working hours of around 6.4 consecutive rainy days and on-load charge time of approximately 2.7 sunny days from 0% to 100% under load^† ‡. These figures are based on laboratory simulations and meteorological data and are intended as a guide for network and system design. Actual results will vary with region, season, load power, installation angle and shading, so real-world measurements should always be used when fine-tuning deployments.
• Manual angle adjustment from 5° to 55°: The adjustable bracket with 5°/15°/25°/35°/45°/55° settings gives installers the flexibility to tailor the panel’s tilt to local sun paths. This is valuable when installing on surfaces that are not ideally oriented or when seasonal adjustments are desired. Better alignment with the sun increases daily energy harvest, improving battery charge levels and helping to support connected cameras through periods of adverse weather.
• Comprehensive software and safety protections: Built-in software features such as load control, high/low temperature protection, overdischarge protection and smart charging control safeguard both the battery and connected devices. Additional capabilities including power consumption statistics, real-time status display, firmware remote update, remote reboot and remote message push give operators powerful tools to manage the system proactively. This reduces the likelihood of unexpected outages and minimises time spent on manual diagnostics.
• IP66 weatherproof design with certified compliance: The SP6030 carries certifications including CB, PSE (battery), CE, FCC, VCCI, IC and IP66, demonstrating that it has been tested for safety, EMC and environmental protection. The weather-sealed housing and connectors are designed to withstand dust, rain and wind-driven spray, making the system suitable for demanding outdoor installations. This robustness is especially important when the unit is deployed in exposed rural, coastal or industrial locations where service access may be limited.
• Recommended pairing with VIGI C540-4G camera: While the VIGI SP6030 is sold as a standalone solar power system, it is an excellent power companion for TP-Link VIGI 4G cameras such as the VIGI C540-4G. When paired with a suitable 4G camera, the SP6030 enables fully off-grid video surveillance with smart detection and remote access, making it a flexible building block for a wide variety of professional security deployments.